DOA SENSE DESIGN STUDIO · CENTRAL DISPLAY
Disassembled Wooden Cake Stand
Layer upon layer of products. Brand visible from every angle.
Custom-sized multi-level center display stand. Choose from white or wood-textured MDF laminate. Measure the shelves and banner; customize the banner and optional base surfaces to your brand. Choose white or wood texture for the 8mm columns; column color does not affect the price. Design only the top edge of the banner in the form of your graphic using transparent PNG. Review the 3D design; see the current price and estimated shipping.
- 18 mm MDF laminate base
- 1–6 top shelf
- Colorful plexiglass railing
- From 1 piece
Custom-sized, disassembled wooden cake stand.
Custom-sized, disassembled wooden cake stand. White or wood-textured MDF laminate, separate product space and graphic area, rounded shelf and banner corners. Download graphic templates in a single ZIP file and upload your images; see the price and shipping with optional base printing.
Multi-tiered display in the center of the room with a demountable wooden cake stand.
The demountable wooden cake stand is a custom-sized centerpiece display stand designed to showcase products at varying heights around a single central point. The name "cake stand" refers to the tiered display style. Used in pharmacies, cosmetic stores, personal care departments, and for displaying packaged products, this model creates a dedicated display point for your brand with its shelves that make packaging visible from four directions, printed top banner, and wide base.
At Doa Sense Design Studio, you can define the base dimensions, number of shelves, net spacing between shelves, and banner area yourself. A live 3D view shows the relationship between your chosen dimensions. When the design changes, the unit price, price per unit, and estimated shipping cost are updated together.
Start with the dimensions of your product.
Measure the base and height of the packaging. Choose the base according to your floor space and the shelf spacing to allow for easy access to the product. The width and depth of the upper shelves should be 3.6 cm smaller than the outer dimensions of the base.
Customize the shelves to match your brand.
You can choose corner radii of up to 50mm on the upper shelves, optional colored plexiglass railings, and independent edge banding colors. Download the banner template as a ZIP file and upload your design. When you open the optional base print, the templates for the wide and deep surfaces are also included in the same ZIP file.
View the design and price together.
Start with one unit or change the order quantity and compare it to the quantity chart. The unit price shown on the screen excludes VAT; the total including VAT and estimated shipping is shown separately. Production begins after your technical and print approval.
Materials and adjustable sizes.
| Base width and depth | Each 20–80 cm; hollow box structure with sharp corners under all conditions. |
|---|---|
| Base height | 12–60 cm |
| Bed base and shelf material | 18 mm white or wood-textured MDF laminate; upper shelves are 3.6 cm smaller than the base width and depth. |
| Interconnecting parts | 8 mm MDF laminate |
| Number and spacing of top shelves | 1–6 top shelves; 10–45 cm net shelf spacing. |
| Top shelf corner radius | 0–50 mm; base corners remain sharp. |
| Banner | 3 mm Forex, double-sided active chart; width from 10 cm to base width. Product gap 0–50 cm, active chart height 5–50 cm; top corner radius 0–100 mm (limited by half the width and total height) |
| Optional railing | 3 mm plexiglass on all four edges of the top shelves and base; 5–55 mm visible height, plus 8 mm channel allowance. |
| Balustrade corner radius | From 0 to the net railing height visible above the shelf; a physical length limit applies to short pieces. |
| Color options | Black, white, red, blue, green, yellow, pink, orange, and purple. Railing semi-transparent or opaque; edge banding with independent color choice. |
For example, on a 40 x 40 cm base, the upper shelves would be 36.4 x 36.4 cm. The top of the base is also a product display area; if three upper shelves are selected, four display levels are created including the base. Not every size selection provides the same load-bearing capacity. Product weight and distribution, placement, and connection details are clarified in the pre-production technical evaluation.
Three separate graphic areas for the banner and base.
Define the banner height separately as the height of the product space on the top shelf and the height of the active graphic. The green area shows the area where your banner image will be applied. The product space remains unprinted. A radius of up to 10 cm can be given to the top corners of the banner; for smaller sizes, the limit allowed by the geometry will be applied.
The "Download Visual Cut-Outs as ZIP" button prepares PNG templates of the selected graphic areas in a single ZIP file. If base printing is disabled, only the banner template is included; if "Include visuals on base" is selected, templates for the base's wide and deep surfaces are also added. Base printing is optional and will be added to the price calculation when selected. Templates are prepared at 150 ppi, with thin dark gray borders and no additional margins. Design while maintaining the template dimensions; upload three images separately to apply the banner to both sides, the base's wide surface design to the front and back, and the depth surface design to both sides. Maintain the template ratio when uploading images. If you change the dimensions later, the preview will be adapted to the updated surface; graphic suitability will be checked before printing.
Customize the multi-tiered wooden display stand to suit your brand.
The shelf rail option is applied to all upper shelves and the base together. The rails are positioned 7 mm inside the shelf edge. The ends of the slats normally start 18 mm inwards. If the shelf radius exceeds 7 mm, half of the excess radius is added to each end spacing. For example, at a 30 mm radius, the end spacing will be 29.5 mm. The coaxial plexiglass slat on the base is 36 mm longer than the one on the upper shelf.
When a visible railing height of 20 mm is selected, the resulting plexiglass will be 28 mm high; 8 mm of this will fit into the channel opening to the shelf. You can make the presentation softer or more pronounced by choosing the top corner radius and permeability. Only the MDF laminate edge banding on the upper shelves can be matched to the railing color or used in a different color. There is no edge banding on the base.
Custom-sized, disassembled stand: packaging and shipping cost included.
Shelves and mounting panels are dimensioned to fit within the hollow base. The design area provides a warning if the banner does not fit within the base's inner bottom or if the parts do not fit within the base's height. Layout is checked before production.
Package dimensions are calculated as base width + 1 cm, base depth + 1 cm, and base height + 6 cm. If a railing is selected, the visible railing height is also added to the package height. For example, for a 40 × 40 × 20 cm base and a 20 mm railing, the package will be 41 × 41 × 28 cm. Weight estimation is based on the volume of the hollow base and shelves (18 mm MDF laminate), the connecting parts (8 mm MDF laminate), the Forex banner, and the selected plexiglass railings. Material waste is not added to the weight of the transported product.
Frequently Asked Questions
Which products is this cake stand suitable for?
The tiered central display area is intended for the presentation of boxed, bottled, and other packaged products at the point of sale. It can be used as a promotional or branding area in pharmacies, cosmetics, and personal care stores. Suitability for direct food contact is not a standard feature of this product.
Why are the shelves 3.6 cm smaller than the base?
The base walls are 18 mm thick on both sides. To allow the shelves to fit inside the base when disassembled, the outer dimensions on both sides are kept 36 mm smaller than the base in total. Manufacturing and assembly tolerances are checked during technical approval.
Does adding a railing change the price and shipping?
Yes. The cutting area of the plexiglass is added to the material cost, and a price multiplier based on the order quantity is applied. The box height is increased by the height of the visible railing; the weight of the plexiglass is also included in the shipping calculation.
Are the prints and products in the photo included in the order?
The photos show example brand applications. Products on display are not included. Your own print file, layout, and technical production details will be approved separately for your order. Graphic files you upload for your chosen areas will be previewed as full areas on the relevant surfaces and saved with your order design when you add it to your cart.
What does the starting price on the page represent?
The current price is for one stand including a 40 × 40 × 20 cm base, three 36.4 × 36.4 cm top shelves, 25 cm shelf spacing, a 30 × 25 cm banner (10 cm product space and 15 cm active graphic), white MDF laminate, base without printing, railing, and sharp shelf corners. The initial offer shows the price including VAT but excluding shipping; different sizes and quantities will be calculated by the designer.
Design your centerpiece display stand according to your product.
Choose your measurements, try out colors, and see the current price of your design.
